YesWelder Promo Codes and Coupons December 2025

Flux-135-PRO 110V Digital Display Flux MIG/Lift TIG/Stick 3-in-1 Gasless MIG Welder

YesWelder FLUX-135-PRO welder provides perfect gasless welding, suitable for 0.30”& .035” flux core wire. Portable and lightweight, suitable for any Do-It-Yourself, Maintenance, Repair, Metal Fabrication, and Hobbyist project. Features Multi-process: Gasless MIG/Stick/Lift TIG, 3-in-1 Welder. (Lift TIG function is optional, need to buy additional WP-17V-10V lift TIG torch). Synergic MIG Setting: Adjust wire feed speed to synchronize current and output voltage effortlessly. Refer to the welding parameter table for specific settings. Using wire feed speed (measured in inches per minute) to adjust welding parameters instead of current aligns better with welders' habits and enhances welding efficiency and quality. Convenient Wire Inching: Equipped with an electric wire feed button, enabling rapid wire feeding with just a press of the button. No need for prolonged pressing of the gun to control wire feeding, freeing up your hands and saving time. Digital Large Screen Display The digital screen clearly displays various parameters. In MIG mode, it shows fine-tuning voltage values. In manual welding mode, it displays the settings for hot start and arc force, with indicator lights to show whether these functions are enabled. What’s included FLUX-135-PRO Welder MIG Gun 6.5ft Earth Clamp & Cable 6.5ft Electrode Holder & Cable Contact Tips .030”& .035” 1 roll E71T-GS/2LB-0.8 Wire （Since 2025.5.28） Manual Specification: Product weight: 11.13lb Product Dimensions: 16.14”*6.5”*11.02” Supply Voltage: 110V 50/60 Hz Input Current: 50A@110V, Wire Spool: 2LB Welding Material: Carbon Steel/Stainless Steel Thickness: Up to 2/5” Protection Class: IP21S

LYG-M800HP True Color View Auto-Darkening Welding Helmet

Features: Great For TIG MIG MMA, Plasma Applications with Grinding Feature Super Large Viewing Size 3.93"X 3.66" with 4 Premium Sensors Better clarity, True Color view - 1/1/1/2 Optical Clarity Increased battery life Superior comfort with the pivot style headgear. Specification: Materials: PP Light states: DIN 4 Dark states: DIN 5～9/9～13 free adjustment(Outside Variable) View Area: 100 x 9.3 cm / 3.93 x 3.66 inch Response time(bright to dark): <1/10000 seconds(normal temperature conditions) Sensitivity (welding based on current size): adjustable: Low/high Power on/off: Fully automatic Power supply: Solar cell replaceable battery UV/IR protection: DIN 16 Working temperature: 23-131℉ Storage temperature: -4-158℉ Low voltage indicator: Yes ADF self-check: Yes Package Includes: 1 x Auto Darkening Welding Helmet 1 x User's Manual 2 x Replacement Lens 1 x Replacement Battery 1 x Storage Bag 1 x Headgear Note: The headgear is default installed in the middle position. When adjusting the headgear, put both sides in a symmetrical position, or it will break down quickly.

BB03 Welding Helmet Carrying Bag

YesWelder Welding Tool Backpack is designed specifically for the welder's environment. It provides the solution for convenient handfree tool transport, whether for climbing ladders or carrying bulky tools or construction equipment. It is widely used by Welding , HVAC, satellite/cable television, stadium lighting, telecom/networking, and wind turbine technicians. Features: Material Quick-dry air-mesh padding and bacterial-resistant materials Made of Weather Resistance 600D Polyester. Large Capacity Bag with Welding Helmet catch, Size 16.5*7.1*12.6 inch, perfect to store all size welder helmet. Perfect Design with Business Name Card, Side Pocket, IPAD Zipped Pocket inside, Folded Welding Helmet Catch. Hold All of your Welding leather gloves, Welding Helmet, Welding Jacket, grinder, tools, and more you need Ergonomics Design Padded back panel for extra comfort and maximum airflow.Reinforced shoulder straps for excellent shock absorption and sweat absorption. Sturdy & Waterproof Rubber Feet The sturdy molded base provides a flat surface to stand the backpack upright, in any environment and elevates your tools so they do not become damaged

FIRSTESS MP200 5-in-1 Welder & Cutter

The MP200 is a versatile and powerful 5-in-1 welding machine specially designed for home DIY or maintenance projects. It can be used to weld MIG (GMAW), Stick (SMAW), Gasless (FCAW), and TIG (GTAW). YesWelder MP200 also allows you to cut at the same time. Suitable for both home DIY and industrial projects. FEATURES Synergic Controlled on MIG function, very easy and simple operation. Gas MIG/Gasless MIG/Lift TIG/Stick/CUT 5 in 1. Can take up to 0.9mm(.035") MIG solid wire(Gas MIG) and 0.9mm(.035") MIG FLux wire(Gasless MIG). Apply to D100/D200 rolls (<10lbs) of MIG wire. Ideal for 7018/6011/6010 electrode. Smart Memory & System Reset.

Firstess DP200 Multi-Process DualPulse™ MIG Welder

YesWelder FIRSTESS CT2050 Powerful 7-in-1 Welder & Cutter

Combining the most potent welding and cutting tools into an easy-to-use professional machine, The Firstess CT2050 is a workhorse, allowing you to cycle through AC/DC TIG, AC/DC Pulse TIG, Stick Welding, Plasma Cutting, and more at the tap of a button. It's a compact and versatile machine. Designed to help you break through your welding barriers and unlock new levels of skill, power, and creativity. Features: AC TIG for welding aluminum (1/25” / 1mm - 1”/25mm) Pulse TIG for the most awkward of welding angles Built-in air compressor for maximum portability Doubled cutting thickness (1”/25mm) 96-265V wide range offers smooth, fast, and precise welding and cutting  PFC Technology provides substantial energy saving PFC (Power Factor Correction) Technology Multiple advantages such as energy saving and wider input voltage. Works with 96-265V.High energy efficiencyIt helps to reduce energy consumption and costs as it maximizes real power drawn from the grid supply, reducing energy and inefficiency. Thus saving electricity while stabilizing welding performance for a consistent output. Primarily, it ensures a stable cutting process with fluctuating voltage in the mains, using long extension cables. Worldwide operation96V-265V wide voltage range means the device can be used worldwide on construction sites. Pulse TIG Welding for Thin Metal Pulse for TIG gives greater heat control over the welding process so that it will not burn through the metal workpiece. Pulse TIG welding is an easy way to create a smooth, clean weld for a TIG welding application. Highly used for base metals (stainless steel) down to 1/25'' for evenly distributed and great looking. Pulse creates neat welds in far less time, especially useful for the same metal workpieces in a fabrication shop bump up the pulsing rate to improve welding speed. Pulse also provides welders the flexibility needed for welding corners, pipes, and other hard-to-reach spots without ruining an edge or filling a hole with filler metal. AC TIG Aluminum Welding AC is used to weld aluminum because its positive half cycle provides a "cleaning" action, and its negative half cycle provides penetration. It helps remove and break up the oxide layer on aluminum, creating a nice flowing weld puddle. Smart Control for AC welding Smart Set makes welding easy by taking the guesswork out of AC TIG welding settings. Simply select welding angle ( flat, vertical, or overhead) and Aluminum thickness; the machine will recommend the ideal parameters such as amperage, pre-gas, post gas, slope up time, slope down time, AC balance, etc. It is very friendly to beginners, especially for complex settings related to welded aluminum sheets. Remote Control Available Pedal remote and welding torch remote control are available in foot pedal torch operation mode.Equipped with remote amperage control TIG torch, the hand control provides remote on-off control of the welding power source contactor, gas solenoid control, and full range remote current output control. Capable of foot pedal remote control, it allows the operator’s control on real-time welding current even further than 10m. Note:1. Foot pedal is not included.2. If you intend to adapt to a different brand pedal, ensure the wire connection is the same. Alternative Choice for Air Compressor The CT2050 comes with a built-in compressor, making it easy to take on various outdoor projects, and making life for welders on the road that much easier. It’s able to start cutting without an extra air compressor.The CT2050 can also be connected to the external air compressor – perfect for those seeking the highest quality cuts. Non-touch pilot ARC The CT2050 applies a non-touch pilot arc, great for cutting rough, painted, or rusted surfaces with minimal dross. It allows starting cutting before the electrode touches the metal surface — resulting in a flat cut surface and prolonging consumables’ life. Non-HF Start Arc Non-High frequency or “blowback” uses the air pressure “blows back” a conductor held open by spring tension. Overcoming the spring tension and forcing the conductor back onto its seat, completing the pilot arc circuit. The “blow-back” start comes without interference, is safe and ideal for general use, and is friendly to the surrounding electrical machine and human health. CNC Cutting Available Equipped with CNC Interface Port, compatible with CNC table ratio 1:1.Great for making precision cuts that are impossible to get with a hand-held tool in auto repair, machine fabrication, and construction Built-in Auto VRD The VRD functions will activate when the welder is on.It reduces the voltage of the open circuit to a safer level, thus reducing the chances of electric shock in case the wrong connection for cutting the torch when the OCV is high in Cutting.The VRD function will promptly activate when the electrode does not touches the workpiece.The VRD function will automatically be released when welding is completed and leave the work

Firstess DP200 Multi-Process DualPulse™ MIG Welder

LYG-Q800D-YM Larry Customize Monster Graphic Auto-Darkening Welding Helmet

YesWelder is proud to collaborate with Atomic Dice Studios for a limited monster collection, exclusively custom-designed YesWelder Darkening Welding Helmet. From the first time he picked up a pencil, Bob McElroy has always known that he was destined to be an artist. Spending his childhood drawing cars and bikes from his father’s magazines, he developed a strong connection with both the arts and the world of automotive and tooling. The story for Larry: “When I began working on this creation I was busy and running on no sleep. My eyes are heavy and burning, and hot fresh coffee keeps me going, however, my addiction to creating and art always outweighs my discomfort. It made me think of a guy I worked with as a welder. Larry burnt wire all day and most of the night. He was always tired and beat but squinted through bloodshot eyes to complete the jobs and lay down perfect nickels. Passion for your job, pride in your work, Love for your talents- that’s what this design means to me. Strength and fortitude to do the best you can no matter the pain and exhaustion that is upon you. So when you flip up the hood and your eyes look like Larry’s, rest in knowing you did your best work!!!” This is why Bob does the design. Features: Great For TIG MIG Stick, Plasma Applications with Grinding Feature Large Viewing Size 3.93"X3.23" With non-auto-darkening Side View,4 Premium Sensors Better clarity, True color view - 1/1/1/1 Optical Clarity Increased battery life Superior comfort with the pivot-style headgear. Specification: -Materials: PP-Light states: Shade DIN 4 Main Window (5 Side Window)-Dark states: DIN 5～9/9～13 free adjustments (Outside Variable)-View Area: 100 x 83 mm/3.94 x 3.23 inch, Side view size: 4.3/1.96 x 4" (non auto-darkening)-Response time(bright to dark):<1/30000 seconds(normal temperature conditions)-Sensitivity (welding based on current size):adjustable: low/high-Power on/off: Fully automatic-Power supply: Solar cell, replaceable battery(Model: CR2450)-UV/IR protection: DIN 16-Working temperature: 23-131℉-Storage temperature: -4-158℉-Low voltage indicator: Yes -ADF self-check: Yes Package Included: 1 x Auto Darkening Welding Helmet1 x User's Manual2 x Replacement Outside Lens,1 x Replacement Inside Lens1 x Storage Bag Note: The headgear is default installed in the middle position. When adjusting the headgear, put both sides in a symmetrical position, or it will break down quickly.