Buffer Tube Mount for Manticore X by Rim/Edge
Tandem KrossTandem Kross
3.0

Buffer Tube Mount for Manticore X by Rim/Edge

USD 19.99

Description

At a Glance: Accepts mil-spec buffer tubes Single-screw installation Supports straight or angled configuration The Buffer Tube Mount for Manticore X by Rim/Edge is designed to accept mil-spec buffer tubes on your Manticore X. Still configurable in either the straight or angled configuration, the Buffer Tube Mount allows you to install your choice of mil-spec tube and compatible buttstock. This addition gives you new ways to fully customize your Manticore X. Supported Models: Manticore X Lower for Ruger® 10/22® IMPORTANT: All NFA rules and state laws apply to the purchase of this item. COMPATIBILITY NOTE: This product is designed to be used with a mil-spec AR-15 carbine buffer tube and carbine castle nut. WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause reproductive harm. For more information go to www.P65Warnings.ca.gov

Tandem Kross deal

You could save on Tandem Kross Buffer Tube Mount for Manticore X by Rim/Edge with a Tandem Kross promo code:

    Tandem Kross logo

    5% off

    0 uses
    high

    worked about 2 months ago

    5% Off (Storewide) at Tandem Kross
View all Tandem Kross coupons and promo codes

More Tandem Kross Products

#TANDEMIZED Ruger® Mark IV™ 22/45 Race Gun

#TANDEMIZED Ruger® Mark IV™ 22/45 Race Gun

IMPORTANT INFORMATION:  Shipping and FFL transfer fees are the responsibility of the customer. This product is NOT eligible for free shipping promotions. This firearm is a serialized product or “regulated good” and will NOT be shipped directly to the purchaser. This product requires an FFL transfer and we will ONLY send it to your designated FFL. Ruger® Mark™ IV 22/45™ Race Guns are built to order and will require 3 to 4 weeks to fully process and assemble your custom build. At a Glance: Fully assembled and upgraded Ruger® Mark IV™ 22/45™ LITE Competition-ready right out of the box Shipped in a TandemKase Pistol Bag The #TANDEMIZED Ruger® Mark IV™ 22/45™ Race Gun is a rimfire pistol ready for competition right out of the box! This firearm will come with all the typical accompanying components you can expect coming from the factory, as well as a number of additional parts, accessories, and upgrades from TANDEMKROSS all pre-installed. Here’s all the great value packed into this single product for you: Accelerator Forward Thumb Ledge Blast Pack Fire Control Group Bolt Keeper Extended Bolt Stop Cornerstone Safety Thumb Ledge Fiber Optic Front Sight Game Changer PRO Compensator for .22LR halo Charging Ring hiveGrip TANDEMKROSS Aluminum Grip Frame (fully assembled with all TANDEMKROSS internals) Titan Extended Magazine Release Victory Trigger TandemKase Pistol Bag Two 10-round factory magazines Ruger® Cable Lock Your choice of color Ruger® Mark IV™ 22/45™ LITE upper This competition-ready pistol has been carefully assembled, upgraded, and live-fire tested by TANDEMKROSS’s own in-house gunsmiths to ensure the highest level of quality and safety. For as long as supplies last, this race gun comes in your choice of color for the TANDEMKROSS Lower, your choice of black or red for the upper, and your choice of black or red for the installed accessories. This pistol is not just a pistol, but a piece of hand-tailored, American craftsmanship. Get your own #TANDEMIZED Ruger® Mark IV™ 22/45™ Race Gun today! PLEASE NOTE: No individual component of this product is eligible for return unless for manufacturer defect. To return an individual component of this bundle for any other reason, the package must be returned in full. All FFL transfer fees and shipping costs are the responsibility of the customer. INTERNATIONAL CUSTOMERS: Please note, because this product contains a complete, serialized firearm and a frame, this product is NOT available for international sales. WARNING: Cannot ship to California, Connecticut, Maryland, Massachusetts, or New York. The TANDEMKROSS components of this assembled product are protected against mechanical failure by TANDEMKROSS. Learn more about our warranty and returns policies here. WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause reproductive harm. For more information go to www.P65Warnings.ca.gov

USD 1149.99

Manticore X Lower for Ruger® 10/22®

Manticore X Lower for Ruger® 10/22®

IMPORTANT: Mount your Manticore X Lower to a receiver before pulling the trigger. Pulling the trigger prior to installation may result in damage to the product or lost parts caused by springs under tension. Reference written or video instructions for additional information. The video above is the abbreviated overview for how to install a Manticore X Lower to your receiver. For more in-depth instructional content, click this link to view our Manticore X Lower Playlist on YouTube. At a Glance: Merged chassis and trigger assembly for easier takedown and reduced weight Improved user-customization Optic, barrel, and receiver detach as a unit to maintain consistent zero Meet the Manticore X Lower for Ruger® 10/22®, a groundbreaking upgrade that marks the next phase in the evolution of the Manticore series and 10/22 style firearms. This modernized system is meticulously designed with modularity as its core objective, offering a level of customization that sets it apart from conventional 10/22® builds. For those seeking “the full package,” be sure to also get the PRO Bundle for Manticore X! This discounted combo includes our M-LOK® Forend, AR hiveGrip, and Folding Picatinny Buttstock to provide you with everything you need for the ultimate upgrade. Unlike traditional 10/22® chassis or stocks, the Manticore X boasts a lightweight, integrated trigger assembly and chassis design. This seamlessly mounts to Ruger® 10/22® receivers, barrels, and a myriad of aftermarket accessories to offer the ultimate advancement in customization and modularity. Its compatibility extends beyond the ordinary, allowing shooters to explore diverse configurations tailored to their preferences. The heart of the Manticore X is  a pre-assembled housing ready to accept AR style grips with or without tangs. The lower doesn’t just stop at grip compatibility as Manticore X also supports picatinny mounted buttstocks, braces, sling swivels, and more to accommodate a wide array of accessories. Additionally, the Manticore X Lower also features an integrated QD sling mount reversible for left or right side use. The Manticore X weights 12.7oz. The Manticore X comes fully assembled and ready to rock with all of the features of the original Manticore and more including: Ultimate Trigger Kit: A lightened trigger pull with a textured, flat-faced Victory Trigger Shoe Trigger adjustability: adjustable for over-travel and pull-weight from approximately 2.25lbs to over 5lbs Cornerstone Rotary Safety: Ambidextrous, short throw rotary safety selector Bolt Keeper Extended Bolt Lock: auto bolt release and enlarged actuation knob for simplified use Fireswitch Extended Magazine Release: textured face and bi-directional actuation; push or pull to drop magazines Aerospace grade aluminum: CNC machined housing with matte black anodized finish Enlarged trigger guard: supports large or gloved hands; features index points for memorable ready position Direct grip mount: accommodates AR compatible pistol grips with or without a beavertail Direct stock/brace/sling mount: rear picatinny mount for stocks, slings, or braces; can be configured for inline or 12° downward pitch to customize stock angle Integral QD rear sling mount: swappable to left or right side Upgraded pins: includes self-capturing rubberized Shock Block Bolt Buffer to replace steel bolt stop pin and ball-detent Upgraded Receiver KrossPins Pin Storage: dedicated retaining holes in lower to store KrossPins and Shock Block Bolt Buffer when disassembled Free floating barrel: The barrel is free-floating from the chassis, allowing for superior accuracy Manticore X uses TANDEMKROSS’s self-capturing Upgraded Receiver KrossPins as a universal takedown mechanism. This method offers improved accuracy and reliability over a detachable barrel system. Fixed barrel and takedown receiver owners can now break down and reassemble their firearm without any shift in point of impact (POI) as the barrel, receiver, and optic remain fixed. The Manticore X works with both takedown and non-takedown receivers. Embrace the future of rimfire with the Manticore X Lower from TANDEMKROSS! The Manticore X Lower comes with your choice of black or red accessories. Supported Models: Ruger® 10/22® Ruger® 10/22® Carbine Ruger® 10/22 Takedown® Ruger® 10/22 Takedown LITE® Ruger® 10/22® Compact Ruger® 10/22® Tactical Ruger® 10/22® Sporter Ruger® 10/22® Competition Ruger® 22 Charger™ Additional Accessories: M-LOK® Forend for Manticore X Folding Picatinny Buttstock by Rim/Edge hiveGrip for AR-15 COMPATIBILITY NOTE: The Manticore X Lower is compatible with factory 10/22 TAKEDOWN® forends. TANDEMKROSS’s M-LOK® Forend for Manticore X is not compatible with 10/22 TAKEDOWN® receivers.  For reliable trigger reset and cycling, TANDEMKROSS recommends using barrels with at least 8" of rifling or more on 10/22® style firearms. This product is not compatible with Tactical Solutions® X-Ring Receiver or left-handed factory Ruger® 10/22® receivers. IMPORTANT: Mount your Manticore X to a receiver before pulling the trigger. Pulling the trigger prior to installation may result in damage to the product or lost parts caused by springs under tension. Trigger pull weight is adjustable by the user. Travel adjustments can directly impact reliability if done incorrectly. TANDEMKROSS recommends adjustments be completed by a qualified gunsmith. Know your State and Federal laws before installing on your receiver. This item is NOT considered an “80% Lower” and Complies with Rule 2021 R-05F Grandfathers in existing classifications of frames or receivers (to include split frames or receivers) and allows them to be marked in accordance with the existing requirements. The full definition can be found here: https://www.atf.gov/rules-and-regulations/definition-frame-or-receiver/summary This product is NOT a serialized part. This product complies with ATF RULING 2009-2 M-LOK® is a registered trademark of Magpul Industries Corp. Patent: https://magpul.com/ip This product is protected against mechanical failure for life by TANDEMKROSS’s Lifetime Guarantee. Learn more about our warranty and returns policies here. ⚠️ WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause reproductive harm. For more information go to www.P65Warnings.ca.gov

USD 499.99

hiveGrip for Ruger® Mark IV 22/45

hiveGrip for Ruger® Mark IV 22/45

At a glance: Aggressively textured rubber for improved grip in any shooting condition Patented impact and vibration dampening material Ergonomic finger grooves for better control - ideal for speed and accuracy   The Ruger® MKIV™ 22/45™ pistol is quickly becoming a favorite for Rimfire Challenge and Steel Challenge competitions and other shooting sports. For a competition-ready race gun, enhanced Ruger® MKIV 22/45 grips are key. The new TANDEMKROSS “hiveGrips” for Ruger® MKIV™ 22/45™ is the answer to your MKIV™ grip needs! Designed specifically with competitive shooters in mind, these flexible, yet durable rubber grips feature an aggressively textured surface for the ultimate purchase and control. Defined, ergonomic finger grooves improve hand placement for more accurate, controlled shooting, while the slim, low-profile design ensures an ideal fit for any user. Made from patented impact- and vibration-dampening material, Ruger® MKIV™ 22/45™ "hiveGrips" are an ideal upgrade for any shooting sports competitor. These wrap-around grips are easy to install and remove for cleaning and firearms maintenance. Get a grip on your Ruger® MKIV™ 22/45™ with the new “hiveGrips” from TANDEMKROSS! #swarmthehive Supported Models:   Ruger® MKIV™ 22/45™ Ruger® MKIV™ 22/45™ Tactical™ Ruger® MKIV™ 22/45™LITE  Ruger® MKIII™ 22/45™ Ruger® MKIII™ 22/45™ LITE  Volquartsen Scorpion w/ 22/45™ frame   Don't forget, all TANDEMKROSS products are Made in the USA and come with a LIFETIME guarantee!   WARNING: This product can expose you to chemicals including quartz (sillica), which is known to the State of California to cause cancer, and mercury, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

USD 39.99

Cornerstone Safety Thumb Ledge for Ruger® Mark IV™ 22/45™

Cornerstone Safety Thumb Ledge for Ruger® Mark IV™ 22/45™

TANDEMKROSS Ruger® Mark IV™ 22/45™ Cornerstone Thumb Ledge Installation Instructions At a glance: Oversized, 1911-style safety ledge Enhances factory safety Improves hand placement for better grip, control Whether you’re a competitive shooter working to improve your speed and accuracy or a weekend plinker looking for better control over your pistol, a strong, proper grip is key. The Cornerstone Safety Thumb Ledge for Ruger® Mark IV™ 22/45™ from TANDEMKROSS is the ideal upgrade to boost your control! The oversized, 1911-style safety ledge, made from anodized aluminum, enhances the external factory safety, without modifying the internals of the safety mechanism. This drop-in part is easy to install and does not change the internal components of the gun. Installation of the Cornerstone Safety Thumb Ledge for Ruger® Mark IV™ 22/45™ is also a great opportunity to remove the factory ambidextrous safety, which can pinch some users' fingers while shooting. The Ruger® Mark IV™ 22/45™ aluminum safety ledge offers an ideal thumb placement for a secure grip and provides consistent hand positioning and helps to control muzzle flip. This is one of the best Ruger® Mark IV™ 22/45™ accessories for competition shooters. Get your Cornerstone today and lay the foundation for a better grip! Supported Models: Ruger® Mark IV™ 22/45™  Ruger® Mark IV™ 22/45™ Tactical™  Ruger® Mark IV™ 22/45™ LITE™  PLEASE NOTE: The Cornerstone installation utilizes a factory spacer included in your original box. This part is referenced on Page 23 of the original Ruger® manual. This product is protected against mechanical failure for life by TANDEMKROSS’s Lifetime Guarantee. Learn more about our warranty and returns policies here. warningWARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

USD 49.99

You May Also Like