FlowTech™ - CM2™ Nozzles
Micro SwissMicro Swiss
4.0

FlowTech™ - CM2™ Nozzles

USD 23.75

Description

Micro Swiss CM2™ Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating. Micro Swiss CM2™ Nozzle Features: Copper Chromium Zirconium body Plated with an Electroless Nickel Plating M2 Hardened High Speed Steel insert Plated with a Electroless Nickel Plating Coated with nonstick nano WS2 coating. Coefficient of friction: 0.035 Heat-treated hardness: 68 HRC Orifice size available: .4mm, .6mm, .8mm, 1.0mm Limited lifetime warranty against wearWarranty Made in USA by Micro Swiss Fits FlowTech™ Hotend for Creality K1 / K1 Max / K1C (M3101) FlowTech™ Hotend for Creality CR-10 SE (M3102) FlowTech™ Hotend for Creality Ender 3 V3 KE (M3103) FlowTech™ Hotend for Creality Ender 3 V3 SE (M3105) FlowTech™ Hotend for Creality Ender 3 V3 (M3106) FlowTech™ Hotend for Elegoo Neptune 4 / 4 Pro (M3107) FlowTech™ Hotend for Elegoo Neptune 4 Plus/ 4 Max (M3108) FlowTech™ Hotend for Sovol SV08 (M3110) FlowTech™ Hotend for Bambu Lab X1 and P1 Series (M3119) FlowTech™ Hotend for Creality K2 Plus (M3111) make-creality,make-creality-model-ender-3,make-creality-model-ender-3-product-nozzle,make-creality-model-ender-5,make-creality-model-ender-5-product-nozzle,make-creality-model-cr10,make-creality-model-cr10-product-nozzle

Try this code on FlowTech™ - CM2™ Nozzles

You could save on Micro Swiss FlowTech™ - CM2™ Nozzles with a Micro Swiss promo code:

    Micro Swiss logo

    10% off

    44 uses
    high

    worked about 1 month ago

    10% Off Storewide at Micro Swiss
View all Micro Swiss coupons and promo codes

More Micro Swiss Products

Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers

Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers

Micro Swiss NG™ Direct Drive Extruder This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone. With the Bevel Gear design, we are able to achieve the industry shortest filament path (less than 41mm). The unique motor placement allows for highly compact, low overhang design.  This further increases system rigidity. Features: Lightweight 3:1 Gear ratio Adaptable to wide range of 3D Printers Hardened steel, precision cut Dual Gear drive Industry shortest, highly constrained, TwinClad XT™ plated filament path Bevel Gear system allows a low overhang extruder mount Integrated with a Micro Swiss All Metal Hotend Made in USA by Micro Swiss Fits CR-10 CR-10s CR-10-S5 CR-10-S4 Ender 3 Ender 3 Pro Ender 3 V2 What's in the box 1x Master Extruder Assembly 1x Adaptation plate 1x LDO Stepper motor - Motor Drawing 1x Fan Shroud 1x Custom extension cable 1x All Metal hotend (M2707-04) - Thermal Break (M2593) - Heater Block (M2587) - Silicone Sock (M2588) - MK8 Nozzle (M2549-04) Hardware: 1x Eccentric nut 1x M5 x .8 x 30mm CAP SCREW 1x 5mm ID 10mm OD Washer 1x M5 x .8 Nylon Lock Nut 2x M5 x .8 x 20mm Nylon Patch CAP SCREWs 4x M2.2 x 8mm Thread Forming Screw for Plastic 4x M3 x 12mm Thread Forming Screw for Plastic 1x 7mm spanner wrench 1x 1.5mm Allen wrench 5x Zip Ties Installation PDF: Installation Instructions - PDF Video Guides: By Daniel at ModBot By John at Tripod’s Garage By Chris at Chris's Basement By Chris at Embrace Making Downloads Printable shrouds and brackets g-code for e-steps STEP File Spare Nozzles Brass Plated MK8 Nozzles A2 Hardened tool steel MK8 nozzles M2 Hardened High Speed Steel Nozzle MK8 nozzles CM2™ - MK8 Nozzle

USD 119.95

FlowTech™ - CHT High Flow Nozzles

FlowTech™ - CHT High Flow Nozzles

FlowTech™ CHT High Flow Nozzle Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate. Brass body Plated with Non-stick Composite Additive TwinClad® XT Plating High Flow CHT The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec Better layer adhesion More uniform layer deposition is achieved by splitting the filament  flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers Compatible with The FlowTech CHT nozzle is compatible with all FlowTech hotend models Orifice size available: .4mm, .6mm, .8mm, 1.0mm Made in Sweden by Bondtech Assembled in USA by Microswiss Fits FlowTech™ Hotend for Creality K1 / K1 Max / K1C (M3101) FlowTech™ Hotend for Creality CR-10 SE (M3102) FlowTech™ Hotend for Creality Ender 3 V3 KE (M3103) FlowTech™ Hotend for Creality Ender 3 V3 SE (M3105) FlowTech™ Hotend for Creality Ender 3 V3 (M3106) FlowTech™ Hotend for Elegoo Neptune 4 / 4 Pro (M3107) FlowTech™ Hotend for Elegoo Neptune 4 Plus/ 4 Max (M3108) FlowTech™ Hotend for Sovol SV08 (M3110) make-creality,make-creality-model-ender-3,make-creality-model-ender-3-product-nozzle,make-creality-model-ender-5,make-creality-model-ender-5-product-nozzle,make-creality-model-cr10,make-creality-model-cr10-product-nozzle

EUR 26.95

FlowTech™ - Brass Plated Nozzles

FlowTech™ - Brass Plated Nozzles

The FlowTech nozzle is designed to be a leak proof and offers an effortless and quick nozzle replacement process. FlowTech design seamlessly integrates the thermal tube with the nozzle, effectively resolving the most prevalent challenges encountered with conventional hotends: nozzle leaks and nozzle replacement inconvenience. Features: Cold Nozzle Change Leak-proof design HighFlow Made in USA by Micro Swiss Fits FlowTech™ Hotend for Creality K1 / K1 Max / K1C (M3101) FlowTech™ Hotend for Creality CR-10 SE (M3102) FlowTech™ Hotend for Creality Ender 3 V3 KE (M3103) FlowTech™ Hotend for Creality Ender 3 V3 SE (M3105) FlowTech™ Hotend for Creality Ender 3 V3 (M3106) FlowTech™ Hotend for Elegoo Neptune 4 / 4 Pro (M3107) FlowTech™ Hotend for Elegoo Neptune 4 Plus/ 4 Max (M3108) FlowTech™ Hotend for Sovol SV08 (M3110) make-creality,make-creality-model-ender-3,make-creality-model-ender-3-product-nozzle,make-creality-model-ender-5,make-creality-model-ender-5-product-nozzle,make-creality-model-cr10,make-creality-model-cr10-product-nozzle

EUR 19.95

FlowTech™ Hotend for Sovol SV08

FlowTech™ Hotend for Sovol SV08

FlowTech™ Hotend for Sovol SV08 This kit comes with a plug and play Heater Core and thermistor, fully compatible with Sovol SV08 printer. Stock z-height, build volume and firmware remains unchanged. By upgrading your Sovol SV08 to a FlowTech ecosystem, you can utilize a comprehensive range of FlowTech, leak-proof nozzles. These nozzles include the DiamondBack, CHT High Flow, and CM2 Hardened tip nozzles. Made in USA by Microswiss Features Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend. Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand. High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate. All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged. 300°C Max Temperature: This hotend is rated at 300°C temperature with a properly tuned NTC thermistor for each specific printer. This particular edition is perfectly tuned for Sovol SV08 so no firmware changes are needed. Fits: Sovol SV08 What's in the box 1x FlowTech™ Heater Core 1x Heatsink 1x FlowTech™ Brass Plated 0.4mm Nozzle 2x Titanium Mounting Screws 1x Silicon Sock Documentation Installation Instructions Installation Instructions - PDF Video Guides: Coming soon... Volumetric Flow Rate Analysis Spare Nozzles FlowTech™ Brass Plated Nozzles FlowTech™ CM2™ Nozzle FlowTech™ DiamondBack Nozzles FlowTech™ - CHT High Flow Nozzles

EUR 75.95

You May Also Like

Two-Cup Travel Teapot Set

Two-Cup Travel Teapot Set

Two-Cup Travel Teapot Set This two-cup and teapot combo packs light for travel and looks beautiful on a desk at home or at work. The set features: One teapot, complete with lid and built-in filter; Two nicely-sized cups that fit snug on top and bottom of the pot; Carrying case for travel and storage; Circular wooden button-style handles; Small rectangular tea towel. When I worked in Beijing at the Nature Conservancy, I saw a lot of office workers would keep a cup-pot combo on hand so they could brew great tea without cluttering up their work space. Needless to say, I got one myself too. It’s a great fit for: Home-office tea-making; Picnic/travel tea-making; Tea friends with less space for storing tea equipment; Tea Party Size? This set is best for personal use or with one partner (1-2 people).   @yourteaguy Would you the cup pot combo? #tea #teatime #celtics #basketball #teapot #happytime #jessesteahouse ♬ Pieces (Solo Piano Version) - Danilo Stankovic       Save on tea with this teapot! Purchase the pot and sampler combo from the drop-down menu above to save $5 on a tea sampler! Jesse’s Review: This cup-pot combo is straight-up a great way to make tea. It’s very practical and yet the results are still top-tier. If you don’t have the space, time, or energy for a full Gongfu-style tea set, this is for you. I keep one of these on my desk at home in case I need to really get work done and can’t do the whole tea ceremony, and I also have a second set just for traveling and taking to friends’ houses. One note - because this set doesn’t come with a pitcher, you need to be sure to only add as much water as you need to drink your next cup. Otherwise, you will be left with extra tea inside the pot which keeps over-steeping. Don’t Forget Your Tea Pets! It’s not gongfu tea time without a tea pet! Check out the tea pets and add one to your order!   Jesse's Quality Guarantee! When I started this shop, I wanted to find a way to take care of tea friends in a way normal online shops wouldn't.   That's why I will replace any defective items for free. Simply contact teafriendsupport@jessesteahouse.com if you have issues.   I also highly recommend buying shipping insurance with your order - for a few dollars, we will cover any breakages, losses, and package theft 100%!   I take care of my tea friends! I hope you will keep coming back!

USD 40.00

Jesse's Teahouse
Jesse's Teahouse