Motion RC Promo Codes and Coupons December 2025

RotorScale MD-500E Super Scale 470 Size GPS Stabilized Helicopter - RTF

Freewing 90mm 12-Blade EDF 8S Power System w/ 4075-1350Kv Inrunner Motor

RotorScale SH-60 Sea Hawk 220 Size GPS Stabilized Helicopter - RTF

RotorScale MD-500 Defender “PAF” 120 Size Gyro Stabilized Helicopter - RTF

Roban B206 700 Size Helicopter Scale Conversion - KIT

EGODRIFT Scale Collection 4230EC Eclipse 4230-520kV Brushless Motor

Roban MD-500D Magnum PI 600 Size Helicopter Scale Conversion - KIT

MD-500D Magnum PI 600 Size Helicopter Scale Conversion Kit from Roban - RBN-KF500DMG6 The MD 500 series is an American family of light utility civilian and military helicopters. The MD 500 was developed from the Hughes 500, a civilian version of the US Army's OH-6A Cayuse/Loach. The successful Hughes 500/MD 500 series began life in response to a U.S. Army requirement for a Light Observation Helicopter (LOH). This is the 600 size MD-500D Magnum PI version. Most of the work is done for you. All wood work is installed. Pre-drilled holes for easy install of the landing gear. Standard 600 set up is an 1100 Kv brushless outrunner motor, 80-100 amp ESC and a 6S 22.2V 5000 mAh or higher LiPo battery. This fuselage can be completed in as little as 4-6 hrs and is intended for the intermediate to advanced builder. Note: As of July 2018, this is an updated version of the MD500 with a full epoxy front fuselage and separate windows. Visit the Official Roban 600 Size MD-500D Magnum PI Scale Helicopter Conversion Kit Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A. Features: Fully painted fiberglass scale fuselage Magnetic cabin lock system for quick and easy access Extremely detailed surface and molded panel lines Use of 600 standard equipment (6S Battery, 1100Kv motor), fly with your existing parts Includes: Roban MD-500D Magnum PI 600 body kit Requires: 600 Size helicopter kit - we recommend the Phoenixtech 600ESP helicopter kit Helicopter flight controller - we recommend the BeastX MicroBeast Plus Flybarless System Electronic speed control (ESC) - we recommend the Castle Creations Phoenix Edge 130A ESC with 5A BEC Battery eliminator circuit (BEC) - we recommend the Castle Creations 20A BEC Pro Brushless motor - we recommend the Scorpion HKIV 4025-1100Kv Brushless Motor Three cyclic servos - we recommend the MKS HBL665 High Voltage Servo Multi-Pack (3 Servos) Tail servo - we recommend the MKS DS HBL980 Tail Servo 6 Cell 22.2V 5000 mAh LiPo Battery with EC5 connector - We recommend the Admiral 6 Cell 22.2V 5000 mAh LiPo Battery with EC5 Connector 8 Channel radio - select a minimum 8 channel radio with pitch and throttle curves from our Aircraft Radio Collection 8 Channel receiver - select a minimum 8 channel receiver from our Receiver Collection Optional: Castle Link USB ESC Programming Kit V3 Important Information - Please Read Roban Scale Helicopters are intended for modelers who have advanced level building skills. Both ARF and KIT product formats require you to install your own electronics (ESC, servos, motor, etc). KIT product formats also require you to install your own helicopter mechanics. Because helicopter mechanics can vary greatly in size and shape, you may be required to modify the fuselage slightly (including cutting, drilling, etc.) to achieve a perfect fit. Roban fuselages are all handmade from fiberglass and therefore may have slight variation in tolerances between body panels, doors, or windows. These variations do not affect flight performance and can be easily adjusted by an experienced builder with proper tools. These precautions are intended for novice builders; an experienced modeler should have no issue achieving perfect results with these premiere scale helicopters kits.

Freewing PLAAF J-10A High Performance 90mm EDF Jet - PNP

PLAAF J-10A with 12-Blade High Performance 6S 90mm EDF Jet from Freewing - PNP - FJ32111P Version Note: This is the 6S version which comes with a 90mm 12-Blade EDF 6S Power System with a 3668-1960Kv inrunner brushless motor and a thrust reversing 120A ESC. The J-10A is a medium-weight, single-engine multirole aircraft designed for air-to-air combat and other various strike missions. Produced by the Chengdu Aircraft Corporation (CAC), the J-10 is used in the People’s Liberation Army Air Force (PLAAF) and became operational in 2006. Utilizing its delta-wing aerodynamic configuration with canards and fly-by-wire system, the J-10A is capable of turning in a much tighter radius than conventional aircraft. The Freewing J-10A 90mm EDF Jet is a highly detailed, scale version of the real J-10A, and features the J-10 “Red Hawk” livery. One of the most detailed releases from Freewing, the J-10A features 11 daylight bright LED lights, including one to illuminate the Heads Up Display (HUD), many scale detail parts, as well as a quick-release ordnance package. Additionally, the Freewing J-10A utilizes screwless, quick-release wings making transport to and from your flying site a breeze. Visit the Official Freewing 90mm PLAAF J-10A Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A. Super Scale Details Throughout The Freewing J-10A is incredibly well appointed for an EPO model with several attention-to-detail scale pieces. Screwless, Quick-Release Wings The Freewing J-10A comes with screwless, quick-release wings for fast and easy access for transport or storage. Illuminated HUD Panel A hint of a new era in the super scale EPO foam class, the J-10A includes an illuminated HUD panel. Ordnance Included The quick-release ordnance comes included right out of the box to finish off that super scale appeal. Functioning Canards This J-10A comes with fully-functional canards enhancing the scale detail emulating the full scale version. Spring-Loaded Top Cheaters Incorporating an innovative ammenity, Freewing has added spring-loaded top-side cheaters that only open and close based on air pressure differential. Retracts with CNC-Machined Shock-Absorbing Struts Another primary scale appeal and feature of any detailed 90mm EDF jet, the J-10A comes with electric retracts including CNC-machined shock-absorbing struts. 11 Daylight-Bright LED Lights The 11 Daylight-Bright LED lights complete the package of scale detail and appeal in dawn, daylight and dusk hours. Features: Screwless, quick release wings for fast and easy transport and storage Illuminated Heads Up Display (HUD) adds a new level of super scale detail 12 Blade factory-balanced 90mm EDF with 3668-1960Kv (6S) or 4075-1350Kv (8S) Inrunner Motor 120A ESC with Thrust Reversing to help decrease landing roll out Electronic, retractable landing gear with CNC-machined aluminum, shock absorbing struts Spring-Loaded Top Cheaters 11 Daylight bright LED lights Scale details include antennas, pitot tube, cockpit detail, lighting and ordnance Conveniently designed quick detach ordnance included right out of the box Nylon hinges on all control surfaces Removable, magnetic nose cone for convenient transport and replacement Includes: Freewing PLAAF J-10A High Performance 90mm EDF Jet - PNP 12-Blade EDF power system (installed) 3668-1960Kv inrunner brushless motor (installed) 120A ESC with thrust reversing and EC5 connector (installed) Electronic retractable landing gear (installed) Servos, LED Lights (installed) Requires: 5 Channel radio (6 for thrust reversing) - select a minimum 5 channel radio from our Radio Collection 5 Channel receiver - select a minimum 5 channel receiver from our Receiver Collection 6 Cell 22.2V 5000 - 6000 mAh LiPo battery - we recommend Admiral 5000mAh 6S 22.2V 50C LiPo Battery with EC5 Connector 6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection