KC Fusion Compound Turbos - (Stage 1 High Pressure & Stage 1 & 2 Low Pressure Turbos) - 6.4 Powerstroke (2008-2010)

Name: KC Fusion Compound Turbos - (Stage 1 High Pressure & Stage 1 & 2 Low Pressure Turbos) - 6.4 Powerstroke (2008-2010)
Brand: KC Turbos
Price: 2900 USD
Availability: InStock

USD 2900.00

Description

KC Fusion High and Low Pressure Turbos Features & Details: Stage 1 High Pressure- Drop in Ready Upgraded billet compressor wheel Ported compressor cover High flow turbine wheel Upgraded 360 journal bearing design Hardware & Install kit included Up to $400 fully refundable core charge Stage 1 Low Pressure- 71mm Billet Compressor wheel Stock size Turbine Wheel Perfect for stock sized injectors Larger 4" inlet Ported anti-surge compressor cover Largest upgraded 360 thrust bearing on the market Drop in turbo (no modification except air filter) REQUIRES 4" INLET AIR FILTER UPGRADE DOES NOT REQUIRE upgrades to the high pressure turbo NO CORE REQUIRED Stage 2 Low Pressure- 75mm Billet Compressor wheel 80mm s400 turbine wheel Larger 4" inlet Ported anti-surge compressor cover Larger upgraded 360 thrust bearing on the market Drop in turbo (no modification except air filter) REQUIRES 4" INLET AIR FILTER UPGRADE NO CORE REQUIRED Recommend injectors: 30% to 100% with twin pumps 850hp to 1000hp capable larger injectors Description: Compound turbochargers from the factory. What a wild concept that Ford included in their 2008-2010 6.4 Powerstroke. Say what you will about the the notorious 6.4, these things can make monster power! This is how you make that kind of power, with our KC Fusion compound turbo set up! The high pressure turbo essentially spools up fast and then feeds the low pressure turbo. The Low pressure turbo then re-compresses the boost to make even more boost and Horsepower. We have worked on our KC Fusion compound turbo set up for several years, changing, upgrading and perfecting the product. now it is ready for all to enjoy. This compound turbo set up is meant for those who want to really open up the raw power of the 6.4 Powerstroke. This turbo set up is recommended for those who want a big boost in performance, but still have the option of light towing. EXHAUST BRAKES: We get asked a lot about exhaust brakes and if they work with our turbos, these will retain the OEM feature if the vehicles calibration allows and is setup for it. We have found that some brands have clearance issues and might cause the brake to hinder performance, rub the turbine wheel, or cause other issues. These brakes typically use some sort of flapper to close which causes extreme exhaust back pressure to aide in braking. This can be hard on a turbo and motor and is not recommended. ***REQUIRES UPGRADED 4" INTAKE TO FIT OVER UPGRADED 4" TURBO INLET***----------------------------------------------- If you want to learn more about how we developed these turbos and what we testing along the way then check out this thread. https://www.powerstrokearmy.com/threads/kc-turbos-6-4-turbo-testing.84009/ SKU 302449 Fusion 6.4 Stage 1 HP Custom Cover/ Stage 2 LP Custom CoverSKU 302448 Fusion 6.4 Stage 1 HP Raw Cover/ Stage 2 LP Raw CoverSKU 302447 Fusion 6.4 Stage 1 HP Custom Cover/ Stage 1 LP Custom CoverSKU 302446 Fusion 6.4 Stage 1 HP Raw Cover/ Stage 1 LP Raw Cover

KC Turbos promo code

You could save on KC Turbos KC Fusion Compound Turbos - (Stage 1 High Pressure & Stage 1 & 2 Low Pressure Turbos) - 6.4 Powerstroke (2008-2010) with a KC Turbos promo code:

5% off

396 uses

low

worked over 1 year ago

5% Off Select Items at KC Turbos

View all KC Turbos coupons and promo codes

More KC Turbos Products

KC Intercooler Pipe Kit - 6.0 Powerstroke (2003-2007)

Intercooler Pipe Kit Features & Details: Available in Raw, Black, Gold, Red, Green, and Blue Powder Coat Finish Powder Coating can take up to 3 weeks to ship Optional Riff Raff replacement silicone boots and T-bolt clamps Aluminum construction Mandrel Bent 2003 will need to remove throttle body Description: Replace your prone to crack OEM piping with the KC Intercooler Pipe Kit. This kit increases air flow to help increase power and lower EGT's. Plus gives a custom look under your hood.

USD 200.00

No Limit ColdSide Kit - 6.0 Powerstroke (2003-2007)

No Limit ColdSide Kit Features & Details: 2 Silicone boots 4 Stainless clamps Manifold flange 0-ring High grade aluminum Description: This intake elbow and CAC pipe is the longest radius from the intake manifold on the market. Made from high grade thick wall aluminum, you will see increased throttle response and slightly lower EGT's in the 30 to 50 degrees range of drop. This kit connects your intercooler cold side to your intake manifold. Made in the USA.

USD 350.00

Kill Devil Diesel O-Ringed Cylinder Heads - 6.0 Powerstroke (2003-2007)

KDD O-Ringed Cylinder Heads Features & Details: Track tested, proprietary O-Ring setup. 32 Tungsten Carbide hardened valve seat inserts to prevent cracking. 32 press in iron matrix valve guides, honed to size for superior lubrication retention and ultimate longevity. Upgraded heavy duty casting, thicker than OE. Pressure tested and vacuum checked. Blueprinted to proprietary valvetrain geometry, to alter valve height and valve recession for maximum reliability and longevity. New USA made high quality valve springs, retainers, locks, valve stem seals, freeze plugs, glow plug sleeves and injector sleeves. Valve spring pressure is tested and balanced ensure consistent spring pressure across all valves The same industry leading O-ring design survived Diesel Power Magazine’s DPC torture test, claiming victory in 2016 and 2017. Order comes as a set (2 heads) Description: KDD O-ring heads start off with a 100% brand new heavy duty casting made just for us, to our exacting specifications. Several key design flaws with the factory cylinder heads - KDD castings incorporate a higher nickel content and thicker deck surface, for a more rigid casting, and hardened alloy valve seat inserts (to prevent cracking of the valve seats like the factory heads are notorious for). Our 6.0 heads have more material around the injector bores, and reinforced injector bolt holes to eliminate cracking in the injector bore. We receive our castings bare, then perform all finish machine work in house, including our proprietary O-ring design. O-ringing the heads virtually eliminates the head gasket issues these engines were plagued with from the factory. A receiver groove is machined into the deck surface of the heads and our USA made stainless wire is pressed into the groove - the wire protrudes from the groove applying extra pressure to all layers of the MLS gaskets - sealing combustion pressure in the cylinder. The high carbon stainless wire we use won’t compress or deform over time and is reusable should you have the heads off of the engine for any reason in the future. KDD O-ringed heads work with any standard “off the shelf” head gaskets, and don’t require any special machining of the block - just prep the deck surface ensuring the block is clean, dry, and flat. The iron matrix valve guides are diamond honed to size leaving a smooth cross-hatch finish in the valve guide similar to the cylinder bore, which provides superior oiling and wear resistance in the demanding diesel application. We then hand assemble the heads with our new USA made valves and springs to our proprietary blueprint-specifications, eliminating sloppy factory tolerances and correcting the poor valvetrain/lifter geometry. We use a quality bonded style valve stem seal so they don’t blow the seals apart like the factory crimped seals do. No Core is required. The heads come ready to install, with a 12-month replacement warranty against defects in quality and workmanship. **Heads DO NOT come with head gaskets. We recommend OEM, Fel Pro, and Black Diamond. DO NOT USE BLACK ONYX** **No core charge or return shipping as cylinder heads are 100% new** -----There is a 3-4 week lead time on all KDD heads. ------

USD 2499.00

KDD Cam Complete Upgrade Kit - 6.0/6.4 Powerstroke (2003-2010)

KDD Complete Cam Kit Features & Details: 8-10 weeks lead time Billet Stage 1 or 2 Cam New OEM Lifters New OEM Lifter Guides ARP Crank Hub Bolts Description: All cams and lifters have been tested for quality control before shipping out. You can select a Stage 1 KDD cam or a Stage 2 KDD cam. Stage 1 - Stock Plus - Ideal for factory replacement, heavy towing applications, maximizes efficiency from Idle-3500 RPM, from stock to 190 cc injectors, stock turbo up to stage 2 VGT turbo. Stage 2 - Street Performance - Ideal for the modified street truck looking to maximize efficiency from 1600-4000 RPM, perfect for stock to 330cc injectors, hands down our most versatile camshaft. Works well for towing but really shines on hot street trucks from 2k-4k rpm. Proven itself in daily driven applications to 1000+ hp street/strip applications. **Adding the 6.4 pushrods to a 6.0 is recommend for higher performance**

USD 1298.65