Adam's Portable Spotless Water Deionizers

Not Eligible For Discounts. Basic Deionizer and Dual Bed Does Not Include Bypass. Please Note this Item will Drop Ship from the Manufacturer 5-7 day shipping. Do you have hard water spots on your vehicle? Adam’s Polishes in collaboration with On The Go, an American Business, has developed a small compact deionizer unit to provide a large supply of laboratory grade deionized water for a spot free water. These powerful units can be attached to your household water supply to effectively filter hard minerals out of your water supply to give you a spot free rinse. Adam's Portable Spotless Water Deionizer comes standard with a built in bypass valve allowing you the option to wash with standard unfiltered water and then quickly switch to deionized water for your final rinse. This feature will ensure that you get the optimum life span from each bottle. Basic Dimensions: 22" Height x 6.75" Diameter Basic filters up to 560 gallons (@100ppm of TDS) of hard minerals out of water supply (No Bypass Included) Standard Dimensions: 22" Height x 9.5" Diameter Standard filters up to 1,120 gallons (@100ppm of TDS) of hard minerals out of water supply Dual Bed Dimensions: 2 Units @ 22" Height x 9.5" Diameter Dual Bed filters up to 2,520 gallons (@100ppm of TDS) of hard minerals out of water supply (No Bypass Included) Pro Dimensions: 49" Height x 8.75" Diameter Pro filters up to 2,240 gallons (@100ppm of TDS) of hard minerals out of water supply All Deionizers Include: Preloaded virgin, high-grade, non-regenerated resin TDS Meter 4 Ft. 5/8" Water Supply Hose Unit will produce water @ a TDS of Zero *10lb Resin Refill Is Required For Basic Unit *20lb Resin Refill Is Required For Standard Unit *40lb Resin Refill Is Required For Pro Unit *40lb Resin Refill - Dual Bed Is Required For Dual Bed Unit First Time Hook Up Instructions Step 1: Lube up all four O-rings on the red bypass valve assembly and 90° gray elbows. Step 2: Screw both sides of the red valve assembly tightly on to the black head. Step 3: Connect both of the 90° gray elbows tightly to the red bypass valve assembly. Inlet (female garden hose thread): Downflow Inlet stamped on black head/left side unit facing you Outlet (male garden hose thread): Upflow Inlet stamped on black head/right side unit facing you Step 4: Connect source water to inlet and flush the system out for 2-3 minutes. Step 5: Your unit is ready for use. Refill Kit Instructions: Step 1: Turn off the water supply and remove the red bypass valve assembly from the black head. Step 2: Remove the black head and empty the used resin into a waste container. Resin is environmentally safe and can be disposed in accordance with federal, state, and local regulations. Distributor tube and basket will be removed during this procedure. The basket on the bottom of the black head can be unclipped to lube the O-ring that is inside the head. Step 3: Rinse out any of the remaining resin from the tank with water. Step 4: Return distributor tube into the tank, slip/place rubber cap into top of tube and then place funnel into top of the tank. Step 5: Slowly pour or scoop resin into the tank. Shake or tap tank to get all of the resin bedded. Step 6: Remove funnel and rubber cap. Step 7: Make sure all O-rings are properly seated and lubed (lube provided). Step 8: Make sure the top basket is clipped into the black head. The top basket will slide over the distribution tube and slip into the black head when you push it down and screw it on. Step 9: Screw both sides of the red valve assembly tightly on to the black head. Step 10: Turn on the water supply and flush the system out for 1-2 minutes. During this process you are flushing out the resin dust from the virgin resin. Step 11: Your unit is ready for use. FAQ's: -How many gallons will the standard unit produce? The capacity of a deionization systems is primarily determined by the Total Dissolved Solids (TDS) in the water source. The TDS can be measured by using the meter provided. The TDS can range from 0 to 1,000 PPM plus but typically will fall between 100-400 ppm across the US. Example: @ 100 ppm of TDS = 1,120 gallons - What value of PPM will leave my vehicle with a spot free rinse? We have provided these ranges over the years: Excellent level: less than 15 ppm *Satisfactory range: Greater than 15 ppm but less than 50 ppm Unsatisfactory level: Greater than 50 ppm *Depends on coloration of vehicle, degree of stainless and one’s individual acceptance level - Does this reduce my water pressure? There is a small pressure drop and should not be noticeable. - When should I replace the resin in the tank? An acceptable TDS ceiling will vary from customer to customer and is greatly dependent upon the coloration of the vehicle. Most customers will operate between 20-40 ppm of TDS, mid-thirties seems to be a fairly wide acceptance level. We would recommend the use of the rather accurate digital TDS meter and measure the TDS during your first cycle thus quantitatively obtaining your preferred level. - Is it safe to drink? We do not recommend drinking the water. DI water has all the nutritional value removed DI has an operating cost generally higher than drinking water DI tends to have a unique taste and odor - Can I water my plants with Di water? You really don’t need purified water for your plants thus we would not recommend. - Can I run heated water through the Di tank? The DI has a max temperature of 105 degrees Fahrenheit. - Can I hook my pressure washer up to the outlet of this Di unit? Yes, ensure the flow rate of the HPW is within the optimum operating range [0.5-2.5 gpm] of the DI unit and never greater than maximum of 3 gpm for best performance. - Should I use Di water for my entire car wash? You can, but many will use only for the final rinse. - How does a Deionizer work? “Deionized Water”-Simply said, water flows over porous beads that are positively and negatively charged and the minerals or total dissolved solids are removed. These ion exchange columns are porous beads called exchange resins producing laboratory grade water. - Will this harm my paint on my vehicle? No, DI water used to obtain a spot-free rinse has been used for applications including Auto’s/Class A RV’s/Small airplanes/Motorcycle’s/both residential & business windows plus many car washing businesses use this for their final rinse. - How long is the Tank good for if not used? The resin has a shelf life of 18 to 24 months. - What do I do with the used resin once I refill the tank? The resin is non-hazardous and can be disposed through normal waste disposal processes. Always dispose in accordance with federal, state and local regulations. - Can I use this with Adam's Soaps? Yes. - Is DI water safe to go down a drain? Yes.

USD 249.99

Adam's Pressure Washer Super Flex Hose

Description

Adam's Polishes deal

More Adam's Polishes Products

Adam's Portable Spotless Water Deionizers

Adam's Jack Stand Wall Mount

Adam's Yellow Unicorn Shampoo

Adam's Colored Foam 3 Pack

You May Also Like

Sister Ai's Qianjiazhai Mountain Gongfu Tea Set

Conceal & Heal Filler Bundle

Snake Tea Cup

JTH X Master Hong Pure Silver Teaware Collaboration